LEDAPLUS is Your Trustworthy LED Downlight Manufacturer & Lieferant in China
LEDAPLUS is a leading LED Downlight Manufacturer in China, supplying LED Downlights for clients for more than 15 years.
Cause of the strong R&D team, from LEDAPLUS, you not only can get excellent quality LED Downlights products, but we also can provide professional technical support for your projects.
Send your inquiry for your next LED Downlights order, you usually will get our best quotation within 8 working hours.
LEDAPLUS: LED Recessed Downlights Manufacturer
A recessed downlight is a lighting fixture that installs into a hollow hole in the ceiling. LEDAPLUS is a professional LED recessed downlight manufacturer, factory, and supplier in China. We supply good quality LED recessed downlights at an offerable price for our clients from all over the world. Such as square recessed LED downlights, round recessed downlights, adjustable recessed LED downlights, and trimless recessed downlights.
LEDAPLUS: LED Surface Mounted Downlights Manufacturer
LED surface mounted downlight is the lamps that install on the surface of the ceiling without a hollow hole. LED surface-mounted downlight is very popular for architects or designers, cause it can be installed on a ceiling that is too fussy or too difficult to install when there is no ceiling void. LEDAPLUS is the top LED Surface mounted downlight manufacturer, factory, and supplier in China, we supply LED surface-mounted downlights suitable for both indoors and outdoors.
LEDAPLUS: LED SMD Downlights Manufacturer
The Beam angle of SMD LED downlights is larger than the one of COB LED downlights, usually, it is 100 degrees to 120 degrees. This will make the light will cover a larger area after turning it on and better for an open area such as the lobby.
The SMD recessed LED downlight also is the downlights for kitchen.
LEDAPLUS is the best SMD LED downlight manufacturer, factory, and supplier in China, we use high-quality SMD LED chips from famous brands such as SMD 2835 from Osram, and SMD3030 from Philips.
LEDAPLUS: LED COB Downlights Manufacturer
If you need a small beam angle, you need to choose a COB LED downlight. Comb with different designs of the Lens, the COB LED downlights can produce different beam angles, from 5 degrees to 120 degrees, to match the requirements of the different projects. LEDAPLUS produces COB downlights from 10 years ago, we have enough experience to provide the right COB downlights for you to match different projects.
LEDAPLUS: Waterproof LED Downlights Manufacturer
Normaly, The IP rate of the waterproof is IP44, IP54, IP65, and so on. LEDAPLUS improves the design of the downlight body and adds a waterproof connector to make the downlights match the IP rate. the waterproof downlights are used in wet environments such as bathrooms, washing rooms, outdoor hallways, and balconies.
LEDAPLUS: Smart LED Downlight Manufacturer
Now smart LED downlights are more and more popular. based on the smart led downlights, you can customize the lighting of the space, such as changing the CCT from 2700K to 6500K, changing the brightness of the lighting, setting the lighting in different RGB, and so on.
There are many smart solutions for smart LED downlights, as a professional smart LED downlight manufacturer, factory, and supplier in China. you can find them in LEDAPLUS such as TUYA, Zigbee, WIFI, Casambi, DALI, and so on. Based on the different smart solutions, you can control the smart LED downlights on the TUYA APP of the mobile phone, and is compatible with various smart speakers, such as Amazon Alexa, Google Home, etc.
LEDAPLUS: LED GU10 or MR16 Downlights Manufacturer
The GU10 downlights are cheaper than Integrated LED Downlights, cause the GU10 downlights are sold without the light source, you need to buy a GU10 bulb separately and the GU10 can be easily replaced when the bulb works out. The GU10 downlights are suitable for the space in the house, such as the bathrooms, the kitchens, and so on.
As a long-story LED downlight manufacturer, factory, and supplier in China, LEDAPLUS started to produce the GU10 downlights earlier than the Integrated LED Downlights, we can supplier the cheapest GU10 downlight set for the clients.
LEDAPLUS: LED Fire Rated Downlights Manufacturer
Want to Find a Reliable LED Downlights Manufacturer?
Hi, I am Echo, the Marketing Manager of LEDAPLUS. We will always be your Reliable LED Downlights Manufacturer in China. Reach me at [email protected] oder Mobil: +86-13427598079, um ein Angebot für Ihre Bestellung zu erhalten FREI.
LED Downlight: The Ultimate FAQ Guide
The following outlines some of the advantages and disadvantages of LED downlights. You will notice that this type of lighting includes all of the pros of LEDs in general and the additional benefits that come with their style.
Pros
- Multiple options available: One of the good things about the popularity of this type of lighting is that it means there are numerous options available. To start, you can choose from one of the types outlined below. From there, you can also usually choose a bezel finish that matches your space.
- Unobtrusive: Because LED downlights are recessed into the ceiling, they are unobtrusive. They will not stick out from the ceiling. This maintains clean lines in the space and prevents the risk of someone hitting their head on the light or the need to opt for short furniture.
- Great for low ceilings: The fact that these recessed downlights do not jut out past the ceiling makes them ideal for any space with low ceilings.
- Modern styling: The fact that this type of light is unobtrusive also helps give your space a modern feeling.
- Efficiency: As LEDs, you get to take advantage of the improved efficiency of this type of light. Research shows that LEDs are 80% more efficient compared to incandescent bulbs. That will reduce your electric bills. It will also reduce your impact on the planet.
- Long life span: The fact that LED downlights are LEDs also means that they have a much longer life span than traditional halogen or fluorescent lights. This reduces their overall cost per year of use. It also saves you the hassle of having to find a ladder and replace the bulbs or fixtures as frequently, as well as the need for downtime to do so. For reference, LEDs can last up to 100,000 hours, although at least 50,000 is the norm. By contrast, incandescent light bulbs will only last for up to 2,000 hours.
- More durable: In addition to lasting a long time without any damage, LEDs are less likely to suffer damage. This comes from the fact that they emit solid-state light compared to the delicate incandescent filaments in traditional lights. Those filaments are sensitive to shock, vibrations, and temperature fluctuations, all of which hurt their durability and longevity.
- Better at directing light: LEDs are also much better at directing light where you want it than other styles of lighting.
- Can highlight an item or area: Because of the ability to direct the light better, you can use these downlights to add extra illumination to a particular area. This can be useful for lighting workspaces or for highlighting items in an art gallery or museum.
- Can illuminate large areas: While you can use LED downlights to highlight small areas, you can also use them to light up larger areas. To do this, you simply choose one with a wider beam and angle it appropriately.
- Produce less heat: Yet another advantage of all LEDs is that they produce less heat than other types of lighting. This is great for keeping spaces with a controlled temperature.
- Quicker to start up: Most LEDs will turn on more quickly than other types of bulbs.
- No toxic mercury: Some other types of lights, such as fluorescents, contain mercury, which is toxic. By contrast, LEDs do not.
- Improved safety: Between the lack of mercury and the fact that they don’t heat up as much, LEDs are a much safer option. This is especially important for businesses looking to reduce their liability.
- Color temperature adjustments: Many LED downlights offer the ability to adjust the color temperature or even the color of the light. This does not apply to every light of this type, so be sure to look for this feature if it is important to you.
- Versatile: You can install the same LED downlights nearly anywhere, from an office to a warehouse to a store. The same lights would even work inside a home. Depending on their IP rating, they are also appropriate for outdoor use.
Cons
- Require a recessed location: Depending on the current setup of the space where you plan to install the downlight, you may have to create a recessed spot to hang the light. This is an extra cost, and it may not be possible in all buildings.
- Potential efficiency loss from creating holes: The process of creating a recessed location for the light not only adds time to the installation process. It may also affect insulation by creating air leaks. As such, you should always have a professional create these recesses.
- Potential loss of noise reduction from holes: Those holes in the ceiling can also reduce the ability of your ceiling to keep sound within the room. Specifically, sound from the room above the one with downlights may filter through the ceiling more easily. Reduce this con by choosing an AT-rated fixture.
- You have to use caps between them and insulation: As an extra challenge during installation, these downlights cannot touch the insulation, as that is a fire risk. That becomes a challenge because you typically have to cut a hole in the ceiling to place them. However, overcoming this challenge is as simple as using caps on the lights. You can also overcome this with the appropriate IC rating.
- Higher initial cost: LED downlights will come with a higher initial investment than other types of downlights. As mentioned earlier, however, they will offer a better value in the long run. This comes from a combination of their efficiency and the fact that they last longer.
- You must space them carefully: If you aren’t careful when planning the layout of the downlights, you may accidentally leave parts of the room brighter than others. This is sometimes called the “cave effect,” as the walls tend to look darker than the rest of the room. But you can overcome this with proper spacing of the lights.
- You sometimes need a lot: Compared to non-recessed lighting styles, you sometimes need to install more downlights than you would otherwise have to. This can increase the cost and the time required for installation. However, you can minimize this somewhat by choosing lights with wider beams.
- Sensitive to high temperatures: When exposed to extremely high temperatures, LEDs will sometimes have a shorter life span. You can reduce this effect with a heat sink.
- They aren’t decorative: Some people dislike the fact that downlights aren’t typically decorative or aesthetically pleasing. This comes from the simple fact that they are recessed and therefore not visible. However, this is not a concern for most people, and you still have some choices for their appearance.
LED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ Guide
LED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ Guide
.LED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ Guide
LED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ Guide
LED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ GuideLED Downlight: The Ultimate FAQ Guide
LED Downlight is also a kind of directional new type of downlight with good concentrating effect, which is more common in some living room and hall decorated ceilings. What is the application of LED downlights? The LED downlights on the market are widely used and have many styles. Therefore, there are many manufacturers of LED downlights. Under normal circumstances, manufacturers of led downlights gather in the Pearl River Delta region. So, let’s take a closer look at the application of LED downlights and the advantages of using LED downlights.
LED downlight application
1, LED downlight application, hotel lighting
The lighting of hotels and hotels uses LED downlights and other products to bring customers a different feeling. In addition to saving energy, it can also be luxurious and warm. For the owners, the LED downlights create a personalized The light environment can fully demonstrate the strength of the company.
2, LED downlight application, living room and home theater lighting.
The light color of the LED downlight is used to create a warm, harmonious and wave-like atmosphere, reflecting the comfortable and casual atmosphere. The application of LED downlights explains another meaning for home lighting.
Museums, art galleries and other places belong to special occasions with high requirements for lighting environment. The special characteristics of the displayed items require that the illumination source does not contain ultraviolet rays and no heat radiation. The LED downlight is a cold light source, and the light does not contain ultraviolet light, which can fully meet the special requirements of the museum and art gallery for lighting.3, the application of LED downlights, lighting in professional places such as museums, art galleries, etc.
4, LED downlight application, conference room, multi-function hall lighting
The intelligently controlled LED downlight is adjustable in gray scale, and the lighting environment of the conference room or multi-function hall can be adjusted according to the content of the meeting. It can be set freely or lively. The intelligent lighting of LED downlight can meet different conference topics. The needs of the light environment.
5, the application of LED downlights, medium and high-end specialty stores, shopping malls and other indoor commercial atmosphere lighting
The LED downlight source is energy-saving and environmentally friendly, and has no ultraviolet light. It caters to the psychology of some merchants to display personalized light environment. It has become a preferred light source for some special products. Its full spectrum color range is very suitable for setting up stores and shopping malls. The atmosphere, LED light source in the local lighting, accent lighting and regional lighting advantages, can create a high-quality light environment unmatched by other traditional lighting electric light source, very suitable for commercial lighting domain. At this time, price has become a secondary consideration.
As with most other types of lighting, you will get the best results if you have a professional install your LED downlights. That said, those with some electrical knowledge can install them themselves.
Even if you plan to have a professional install your lights, it can be useful to understand the installation process. This will help you set realistic expectations for the process and timeline.
How to Replace an Old Downlight
While you should leave wiring to an electrician, most people can install a new LED downlight in place of their old downlight themselves. To do so, follow these steps:
- Turn off the power. This is essential.
- Disconnect your old light’s power cord.
- Remove the old light.
- Unscrew the cover of the driver.
- Connect your cord and replace the driver cover.
- Connect the new power cord to the main power source.
- Securely push the clips on the downlight’s sides, placing the downlight into its desired spot.
- Turn the power on again.
What If You Don’t Have Holes in the Ceiling?
If you do not already have holes for the LED downlights in your ceiling, you will need to create these first. You will also need to set up the wiring in this case.
The following will take you through that process:
- Turn off the power to the area.
- Carefully plan the placement of your downlights. Measure carefully and ensure there aren’t wires or joints in the ceiling where you want to cut the holes.
- Cut the holes using a pad saw or plasterboard saw. Be careful not to cut anything that is above your ceiling.
- Double (and triple) check that the circuit is not live. Put the wiring through the hole.
- Connect the light’s wiring with the electrical wire via a connector or chocbox.
- Continue with step 4 and on from the above process.
Because of their popularity, most lighting manufacturers make LED downlights. That fact, combined with the range of types, means numerous options are available. The following tips should help you choose the right LED downlights for your space.
How Many Downlights Do You Need?
One of the first things to consider is the number of downlights you need for your space. Some of this comes down to the light itself, precisely its lumens output and angle. If you choose lights with a larger beam angle, you could install fewer fixtures than if you chose those with narrower beam angles. You can also use fewer if you choose lights with a higher lumens output.
You want to install about one LED downlight for every square meter of floor space with that in mind. If you prefer to use the area in feet, multiply the ceiling’s area by 1.5. This will give you the total wattage you need. You can then divide this by the wattage per fixture.
Planned Use
When choosing your downlights, one of the most important considerations is how you plan to use them. This will help you determine your requirements, such as IP rating, shape, beamwidth, and more.
Shape
Most downlights will be circular, but you can also choose square ones if you prefer. Think about the appearance you want for your space as well as the shape of the hole you plan to place them in if you want recessed lights.
This is also the time to confirm that its dimensions are small enough to fit in the hole you have prepared for the light.
Beam Width
As mentioned, you can choose how wide of a beam you want your downlight to shine. If you want to install fewer lights, choose wider beams. If you want to install more lights, consider narrower beams.
You may also want to consider a wider beam angle if you want to illuminate the room in general. Consider a narrower beam if you’re going to highlight a particular spot or item in the space.
Light Color
You will be able to choose the light color for your LED downlight as well. Some of these lights have adjustable colors. Otherwise, consider the type of light you want to mimic and choose the appropriate Kelvin temperature.
- 3,000 Kelvin produces warm white.
- 4,000 Kelvin produces cold white. (This is the most common for offices.)
- 6,500 Kelvin produces a shade similar to daylight.
Dimmer or Dimmer Compatibility
Consider whether you want to choose a light with a dimmer built into it. This additional functionality will make the downlight more versatile.
Many lights are also compatible with external dimmers. However, if you plan to use one, confirm that your chosen fixture truly is compatible.
Farbwiedergabeindex
The importance of the CRI for your chosen LED downlight will depend on where you plan to place it. If it is going to a museum or art gallery, you want a high CRI. The same is true of stores or manufacturing facilities for decorative objects, especially textiles.
If you do not need the shades, to be exact, you will typically be fine with a CRI of 80-90. However, a CRI of at least 90 is ideal if you need the colors of objects to appear accurately.
IP Rating
If you plan on placing your downlight outside, you know you should pay attention to the IP rating. This will help ensure it can handle the occasional rain or dust.
You also want to look at the IP rating for any lights you will place in factories, warehouses, or anywhere else with a lot of dust and particles in the air.
IC and AT Rating
In addition to the IP rating, you should look at the AT and IC ratings for your chosen downlights. These address the issues related to insulation and airflow mentioned as disadvantages for this type of lighting.
IC-rated lights indicate that you can cover them with insulation. This reduces the loss of heat, which minimizes the fire hazard. AT-rated lights are air-sealed. This means that the light won’t leak cooled or heated air from the room.
Remodel or New Construction
As you look at the various downlights, you will notice that some are only designed for new fixtures, while some can be retrofitted or work for remodels. If you need to replace an old downlight, always opt for a retrofit fixture. Otherwise, it will not matter.
Appearance
You will always want to consider the appearance of your chosen downlight fixture to some extent. However, the degree to which you do so will likely depend on whether it is recessed. If you select a recessed fixture, you will mostly be concerned with how the bezel or most visible portion looks. After all, the sides will be hidden by the walls of the hole.
If, however, you choose to place the fixture, so some or all of it is visible, this may be a larger consideration. Consider materials, colors, shape, and overall style.
Brand or Manufacturer
Remember that all of the benefits associated with LED downlights only apply if you choose high-quality fixtures. As such, you will want to make sure to choose a manufacturer known for producing quality products. At the least, make sure to choose an ISO 9001-certified manufacturer.
Look for a warranty, as this implies that the brand has confidence in its fixtures.
Guangdong RC Lighting Technologies Co., Ltd.
Location: Jiangmen, Guangdong
Company Type: Electronic Manufacturer
Year Founded: 2013
Number of Employees: over 80
Main Product: LED Recessed Lights, Recessed Underwater LEDs, Recessed Stair Lights, Recessed Pool Lights, Recessed LED downlights, Recessed Outdoor LED Lights
Guangdong RC Lighting Technologies Co., Ltd. takes pride in being the pioneer in providing comprehensive LED lighting solutions. Through stringent quality-control tests and methods, the company maintains its high quality and standards.
The company has made tremendous success in a short period through its impeccable services and high-quality products. However, not all of the success can be attributed to products alone. The technical engineer, customer support, R&D, and sales teams are all equally skilled and competitive.
Thus, Guangdong RC Lighting Technologies Co., Ltd. proves to be a reliable choice for all LED lighting-based solutions.
Dongguan Sumbao Lighting Technology Co., Ltd.
Location: Dongguan, Guangdong
Company Type: Electronic Manufacturer
Year Founded: 2012
Number of Employees: Unknown
Main Product: Recessed Mounted Round LEDs, Recessed LED Lighting Solutions in the retail stores and commercial lighting
With over a decade of experience in the LED lighting industry, Dongguan Sumbao Lighting Technology Co., Ltd. specializes in researching, developing, and manufacturing LED lighting products. So far, the company has rendered services to over 25000 stores around the world.
Dongguan Sumbao Lighting Technology Co. has also undertaken the manufacture, and the lighting design, Ltd. Optical professors of Tsinghua University, lead the design team. Consistent R&D takes place under strict supervision and rigorous checking.
Opting for the professional lighting services and dedicated services of Dongguan Sumbao Lighting Technology Co., Ltd. is a decision you would never regret.
Shenzhen KYD Light Co., Ltd
Location: Shenzhen, Guangdong
Company Type: Electronic Manufacturer
Year Founded: 2008
Number of Employees: over 80
Main Product: Recessed Outdoor and Indoor LED lighting fixtures and solutions
KYD Light Co., Ltd is a high-tech manufacturer specializing in developing, producing, and marketing LED lighting products. Their excellent quality, competitive price, stable and complete supply chain, and thoughtful and committed service have helped them win consumers’ trust.
The company has passed ISO9001:2008 quality management system certification. Its products also have CE, RoHS, CB, UL, ETL, TUV, SAA, and C-tick certifications, which are a testament to its commitment to quality.
Neway Lighting Int’l Co., Ltd
Location: Dongguan, Guangdong
Company Type: Electronic Manufacturer
Year Founded: 2006
Number of Employees: more than 150
Main Product: Recessed LED lighting fixtures and solutions
It is a high-tech enterprise that manufactures nothing but high-quality products. The incorporation of advanced automatic production lines, photoelectric instruments, ASM packaging equipment, and testing instruments ensures high quality, high stability, and high-efficiency products.
Neway Lighting Co., Ltd products have passed the CB, UL, ETL, FCC, DLC, SAA, TUV-CE, Erp, and RoHS certificates. Additionally, several other quality control tests are run to ensure that the products comply with the international guidelines and are highly reliable.
LightSec Co., Ltd
Location: XiaoLan, Guangdong
Company Type: Electronic Manufacturer
Year Founded: 2008
Number of Employees:
Main Product: Recessed LED linear light, Recessed LED tube, and LED accessories.
LightSec Co., Ltd. is a famous LED lighting manufacturer. The company is on a constant quest to optimize its manufacturing process to provide high-performance and quality products to its clients at competitive pricing.
They manufacture a wide range of LED lighting-based products, and all these products have passed several strict quality-control tests before they hit the shelves. Thus, the products have consistently delivered high quality at nominal pricing.
GRN LED Light
Location: Shenzhen, Guangdong
Company Type: Electronic Manufacturer
Year Founded: 2013
Number of Employees: over 30
Main Product: Recessed Outdoor LED lighting, Recessed Downlights, Recessed Spotlights
With an ever-growing facility, expanding product lineup, and high-quality products, GRNLED (Greenriy Technology Co., Ltd) has become one leading LED lighting manufacturers. Provision of quality at competitive pricing is its forte.
The company indulges in LED lights’ production, design, supply, export, and marketing. It follows international practices and management systems and several rigorous quality control tests to ensure high-quality products.
Eurborn Co Ltd.
Location: Dongguan, Guangdong
Company Type: Electronic Manufacturer
Year Founded: 2007
Number of Employees: up to 200
Main Product: Outdoor Lighting, Recessed Underwater Lighting, Recesed Stainless Steel Lighting, Recessed Ground Light, Recessed Wall light, Fountain light, Recessed Spotlight, and Downlight
The unflinching commitment to innovation, excellence, and reliability has led to the unparalleled success of Eurborn. It has been further complemented by complete and scientific high-quality management procedures, excellent quality, and beliefs.
Rather than focusing on developing diverse products, Eurborn focuses on developing products that can withstand diverse environments. Furthermore, all the products by Eurborn comply with international quality inspection standards and social responsibility inspections.
Furthermore, the R&D team has over twenty years of innovating products based on customer requirements. Thus, Eurborn is a reliable manufacturer of LED lighting solutions.
Shaoxing Eastar Lighting Co., Ltd.
Location: Shangyu, Zhejiang
Company Type: Electronic Manufacturer and Trader
Year Founded: 2012
Number of Employees: Unknown
Main Product: Recessed Energy Efficient LEDs, Commercial, Industrial, and Residential Lights, Recessed Linear Wall Washers
Eastar Lighting Co., Ltd has earned quite a popularity in the LED lighting industry with unsurpassed quality of products and top-notch services. The use of cutting-edge technology, the latest machinery, and a skilled team of workers and engineers allows them to deliver high-performance LED lighting fixtures and solutions.
The products undergo significant quality control tests to eliminate any product offering anything less than the best quality products. Perhaps the most remarkable feature is the reduced cost, energy consumption, and environmental impact of the products.
SeniorLED Lighting Co
Location: Shenzhen, Guangdong
Company Type: Electronic Manufacturer
Year Founded: 2011
Number of Employees: about 100
Main Product: Recessed LED Lighting, Recessed LED Tubes, Recessed LED Bulbs, Solar LED Lights, LED Panel Lights, and LED Streetlights
SeniorLED Lighting Co is a renowned LED lighting manufacturer, and its products have penetrated several global markets. Among the plethora of products, LED recessed lighting by the company is highly reliable.
With the use of top-notch LED chips and power-saving lighting components, the LED lights manufactured by SeniorLED come with best-in-class features like high color rendering index, auto-dimming, better transmittance, and high lumen output. Thus, the products are top-notch in quality. Hence, they are widely popular among consumers.
KLM LED Lighting
Location: Guzhen, Guangdong
Company Type: Electronic Manufacturer
Year Founded: 2011
Number of Employees: about 200
Main Product: Recessed Commerical LED Lighting, LED Recessed Downlights SAA approved, LED Track Light, LED Recessed Ceiling Lights, LED Candle Bulb, and SMD Downlight.
KLM Lighting takes pride in being one of the most reliable LED lighting manufacturers in the world. Its products have made a name for themselves through their consistent and dependable quality. It offers a plethora of LED Lighting Solutions, including LED recessed lights.
The products not only work seamlessly, but they are customized to cater to the ever-varying customer requirements. Every product adheres to the quality control principles and resultantly meets global standards.